Are you worried about wires, and want to hide speaker wires? I will tell you easy steps to hide speaker wires and make your desk look much cleaner! Stay Tuned!
We’ve all been there. You want to install a new speaker system in your car or home theatre, but you can’t figure out how to run the wire without making it visible to passers-by.
In both cases – and many others – running cords inside walls may be an option, even if only temporarily.
This is not always the best solution, but it often works in the short term. If you are looking to do this more permanently, you will probably have to buy some materials and hire an electrician to help you out.
One way of hiding speaker wires is to run them along a baseboard or other trim piece where they are secured with the nails or screws that hold them in place.
Because these wires are firmly attached to a piece of trim, you can then wedge this piece of trim underneath your carpeting and into position against the bottom of your floorboards.
This method will work only as long as you securely attach the speaker wire to support itself without assistance.
This is the first thing most of us try when we don’t hide speaker wires. It will work for a little while, but it won’t last forever. When exposed wire rubs against other metallic objects, such as hangers or nails, it can fray and short circuit. Also, after removing the tape, the exposed wire will be sticky, which may damage or discolour the paint on your walls.
This is a plastic sleeve that you can buy at most hardware stores for about two dollars per foot. It comes in different colours and sizes, so you can choose whatever fits best into your décor. You bend it into a U shape and use it to hold your wire in place. It’s not as strong as tape, so don’t try to support too much weight with it, but for speaker wires, it should be adequate.
Who says that you can only hang pictures on nails? If you have an old picture frame that you don’t need, you can tie a piece of string to it and attach the speaker wire to the series. Then stick it into your wall, leaving some slack on either side of the wire. This will hold up your lightweight wires without taking up any visible space or damaging your walls.
If you have an unfinished attic, basement or garage, you may be able to string your wire through the same conduit that carries other cables throughout the house. If it’s a finished room, you can probably find a section of drywall where the inside is not visible from any windows or doors.
This tactic works well in unfinished rooms but can also be applied in houses where you have windows or doors on only one side of a room and an attic or basement directly above it.
You will need some string to hang your wires with, so place a piece through the ceiling and tie bundles of wire to the series. This works well if you have a ceiling fan because you can cover the cables with the blades.
This is a drastic step, but it’s probably your best option if you want to hide speaker wires permanently inside a finished room. The first step is to find an unfinished space in your house that has electricity.
When you look behind the drywall, you should see a layer of insulation (usually pink fibreglass) and electrical wiring running along with studs.
This wiring can carry power from the basement or attic to support the weight of speaker wires as well. Use an awl, ice pick, or drill to make small holes in the drywall for your wires.
From there, it’s just a matter of following the electrical wiring through the walls and into your room.
Speaker wires don’t look very lovely splayed across the floor of your living room or basement. Fortunately, there are many products out there that you can use to cover them up. Simple rugs or runners will do the job, but if you want something a little more stylish, try using a cord concealer instead.
These come in different sizes and styles, but they will generally look much better than a simple rug.
Cord concealers come in two pieces, the first of which is a base piece that you attach to your floor. The second part is an oval cover that you place over the wire to look like a regular section of carpet or wood flooring. You can also opt to hide the wire inside of a decorative baseboard instead.
Many people opt to use the traditional 18-gauge or 16-gauge speaker wire when building a custom installation. However, it is also possible to use flat adhesive wire instead. This type of wiring is designed for inside walls and should not be seen on the surface. It works just as well as regular wire, but you won’t have to drill any holes or install electrical outlets to use it.
It’s tempting to run speaker wires along the edges of your carpets or underneath them entirely, but you should avoid this option as much as possible.
Carpets are not very supportive surfaces, and if there is too much tension on your wires, they could become frayed or worse. This will cause them to break, and you will have to replace them.
An excellent way to keep speaker wire where it belongs is by using a staple gun. You can insert the staples every three feet and use tape to hold the wire together in those places.
This should prevent the wire from sliding around and fraying over time.
Now you have some options for keeping your speaker wires in working order. You can try any of these methods or come up with one of your own. Wire management is a common problem, but if you get creative, you should find an option that works for you.
Speaker wire is essential for any home audio system, but it can be a pain to manage if you don’t know what you are doing. To find the best solution for your needs, consider the following tips on how to hide speaker wires in your walls. It may not seem very easy at first, but with some patience and insight, you should be able to find a method that works for you.